01-General Engine

Product Image Item Name- Price
001-0016/2 ENGINE MOUNT WRENCH

Special 16mm wrench designed to remove the nuts from Mercedes Benz engine mount. Fits: W203, 204, 210, 211, 221

Tool : 001-0016/2
Manufacturer : Baum Tools

$22.98


Add:
001-0016/9 ENGINE MOUNT WRENCH

Special 17mm wrench designed to remove the nuts from Mercedes Benz engine mount. Fits: W203, 204, 210, 211, 221

Tool : 001-0016/9
Manufacturer : Baum Tools

103-0114 CAMSHAFT SEAL GUIDE SLEEVE - 20 mm

Use to install the camshaft sealing ring with cover on. Protects seal lip from damage. Fits: M103, 104, 120

Tool : 103-0114
Manufacturer : Baum Tools

$39.20


Add:
117-0223 CASE DRILLING FIXTURE - V8

Use to install Timesert insert when the cylinder bolt holes strip in the light alloy type engine case. Use with Timesert kit #TS1015 and insert ... more info

Tool : 117-0223
Manufacturer : Baum Tools

$506.00


Add:
648-0053 Mercedes 648 GLOW PLUG PORT REAMER

For the new Mercedes 648 Diesel engines with 10x1.0mm glow plugs. Used to remove carbon from the pre combustion chamber, or after removing broken ... more info

Tool : 648-0053
Manufacturer : Baum Tools

$66.45


Add:
916-0013 HEX HEAD SOCKET - 8mm 1/2 DRIVE

Use to access head bolts under rocker shaft for R&R and torquing. (See #ST3054-G8 and #ST3149-8) Fits: M116, 117

Tool : 916-0013
Manufacturer : Baum Tools

$73.45


Add:
B140-1463A 38 PIN X 38 PIN 7? EXT CABLE

Extension cable allows use of test equipment while driving or on Dynamometer. Fits: W124, 129, 140, 202, 208, 210

Tool : B140-1463A
Manufacturer : Baum Tools

$219.95


Add:
B4750 5 POINT TORX PLUS TOOL SET

Used commonly on various control modules and sensors. T10, 15, 20, 25, 27, 30, 40, 45, 50 Fits: ALL

Tool : B4750
Manufacturer : Baum Tools

$48.88


Add:
BT7205J TERMINATOR LOGIC PROBE

The Terminator is a superior Logic probe combining the features of a DMM and oscilloscope but simplifying the display for technicians that want to ... more info

Tool : BT7205J
Manufacturer : Baum Tools

$179.45


Add:
DBL800 DEUTRONIC POWER SUPPLY

Microprocessor controlled charger/power supply to maintain power levels during programming and diagnostics. Microprocessor controlled charging, ... more info

Tool : DBL800
Manufacturer : Baum Tools

OBD2-BOB OBD-II BREAK OUT BOX

This J1962 break out box allows access to all wires in the OBD-II / EOBD III Diagnostic Interface This makes it easy to trace CAN Bus faults, Power ... more info

Tool : OBD2-BOB
Manufacturer : Baum Tools

$98.45


Add:
ST1054-5 HEX HEAD SOCKET - 5mm x 180mm 1/2 DRIVE

5mm x 180mm long body for various engine bolts. Fits: All

Tool : ST1054-5
Manufacturer : Baum Tools

ST1054/10 HEAD BOLT HEX HEAD SOCKET - 10mm X 160mm

Use this long Allen head socket to remove and install cylinder head bolts. Fits: M100, 110, 114,115, 130, 180,OM615, 616, 617

Tool : ST1054/10
Manufacturer : Stahlwille

ST1054TX-T55 HEADBOLT SOCKET - TORX T55

Special 130mm long T55 TORX head bolt socket for 112 engines. Use with #H992LG-T55 to remove all bolts. Mercedes #000-589-0310 Fits: M112, 113, 155, ... more info

Tool : ST1054TX-T55
Manufacturer : Stahlwille

$35.25


Add:
ST3004 CYLINDER HEAD SOCKET 12mm XZN X 55mm 1/2 DR.

XZN Hex Head Socket-12mm x 55mm 1/2 drive with special short format for cylinder head bolts. Fits: 104, 112, 113, 119, 120

Tool : ST3004
Manufacturer : Stahlwille

ST3054/8L HEX HEAD SOCKET - 8mm X 130mm 3/8 DRIVE

130 mm long, 1/2 square drive, for Allen screws on cylinder head. Fits: M115, 116, 117

Tool : ST3054/8L
Manufacturer : Baum Tools

ST3054X-M10 XZN HEX HEAD SOCKET 10mm X 140mm 1/2 DRIVE

Use to remove and install cylinder head bolts. Tri-square socket head screws (XZN). 10mm 12 point 1/2 square socket, 140 mm long for screws on ... more info

Tool : ST3054X-M10
Manufacturer : Stahlwille

$36.17


Add:
ST3054X-M12 CYLINDER HEADBOLT SOCKET - 12mm

Use to remove and install cylinder head bolts. Tri-square socket head screws (XZN). 12mm 12 point 1/2" drive socket, 140mm long for headbolt screws ... more info

Tool : ST3054X-M12
Manufacturer : Stahlwille

$35.94


Add:
ST3054X-M8 XZN HEX HEAD SOCKET 8mm X 140mm 1/2 DRIVE

Use to remove and install cylinder head bolts. Tri-square socket head screws (XZN). 8mm 12 point 1/2 square socket, 140 mm long for screws on ... more info

Tool : ST3054X-M8
Manufacturer : Stahlwille

ST3149-8 UNIVERSAL HEX HEAD SOCKET - 8mm 3/8 DRIVE.

Use to remove cylinder head bolts at rear of case. Use with sockets #ST3054-8G and #916-0013. Fits: M116, 117

Tool : ST3149-8
Manufacturer : Stahlwille

STAR DIAGNOSTIC SYSTEM - COMPACT 4 SDSCOMPACT4

Mercedes factory diagnostic system. Includes DAS and WIS systems. Fits: All from 1988

Tool : SDSCOMPACT4
Manufacturer : Baum Tools

STNV1414 1/4 X 1/4 BitLokk Bit holder

1/4 dr. x 1/4" BitLokk socket adapter" Fits: ALL

Tool : STNV1414
Manufacturer : Baum Tools

T9A-24 THIN OPEN END WRENCH 24MM

Thin open end wrench 24mm Fits: ALL

Tool : T9A-24
Manufacturer : Baum Tools

$22.50


Add:
T9A-36 Thin open end wrench 36mm

Thin open end wrench 36mm Fits: ALL

Tool : T9A-36
Manufacturer : Baum Tools

$54.00


Add:
TS1015 TIMESERT KIT-10X1.5mm

Timesert kit for rethreading case when cylinder head bolts strip out. Use with alignment jig #B115000 and inserts #TS10155. Fits: M52TU, M54, M56

Tool : TS1015
Manufacturer : Time-Sert

$114.47


Add: