03-Cylinder Crankcase

Product Image Item Name- Price
111-1231 DIPSTICK TUBE DRIVER

Installing tool for dipstick allows easy installation in most models. Vehicles with left and right-hand steering. Fits: M102, 103, 104,111, 116, ... more info

Tool : 111-1231
Manufacturer : Baum Tools



Add:
B651-0161KIT 651 Crank Radial Seal Installer

Used to install crankshaft front and rear radial seals in Mercedes Benz 651 engines. Fits Mercedes Benz vehicle with OM651 engines: SLK, E,C,B, and ... more info

Tool : B651-0161KIT
Manufacturer : Baum Tools



Add:
FLYWHEEL LOCK 110-0040

Use to lock flywheel at starter ring gear. Fits: M110, 615, 616, 617

Tool : 110-0040
Manufacturer : Baum Tools



Add:
FLYWHEEL LOCK 112-0340

Use to lock crankshaft on starter ring gear (mount in starter hole) for vehicles with left and right-hand steering. Fits: M112, ... more info

Tool : 112-0340
Manufacturer : Baum Tools



Add:
FLYWHEEL LOCK 116-0140

Locks crankshaft on starter ring gear. Fits: M110, 115, 116,117, 119, 615,616, 617

Tool : 116-0140
Manufacturer : Baum Tools



Add:
FLYWHEEL LOCK 285-0240

Retaining lock for crankshaft on starter ring gear. Fits: M275, M285

Tool : 285-0240
Manufacturer : Baum Tools



Add:
FLYWHEEL LOCK 601-0240

Locks flywheel at starter ring gear from the transmission side. Fits: M102, 103, 104,111, 601, 602,603, 604, 605,606, 611, 612, 613

Tool : 601-0240
Manufacturer : Baum Tools



Add:
FLYWHEEL LOCK 602-0040

Locks flywheel from the starter side. Fits: M102, 103, 104,111, 120, 137,601, 602, 603,604, 605, 606

Tool : 602-0040
Manufacturer : Baum Tools



Add:
MERCEDES 272 & 273 CRANK PULLEY HOLDER 272-0107

Used to counter hold crankshaft pulley on Mercedes 272 and 273 engines. Fits: 272 & 273

Tool : 272-0107
Manufacturer : Baum Tools



Add:
MERCEDES FRONT & REAR CRANK RADIAL SEAL INSTALLER B111-0843KIT

Used to install crankshaft radial seals on Mercedes engines. Rear seal # 111-0843: W102/111/112/113/137/156/275/285/601/602/603/604/605/606/628/629 ... more info

Tool : B111-0843KIT
Manufacturer : Baum Tools



Add:
MERCEDES REAR CRANK SEAL INSTALLER B271-0043

Rear Crank Oil Seal Remover Installer for Mercedes Benz engine models 157, 271, 272, 273, 276, 278, 629 & 642. Fits: 157, 271, 272, 273, 276, 278, ... more info

Tool : B271-0043
Manufacturer : Baum Tools



Add:
OIL DRAIN HEX HEAD SOCKET 14mm 1/2 DRIVE KO4012M-14

1/2 drive stubby hex 14mm socket for oil drain plugs Fits: All

Tool : KO4012M-14
Manufacturer : Baum Tools



Add:
OIL DRAIN WRENCH - 14mm HEX X 13mm BOX B3676

Use for oil service on later models requiring longer bit and smaller ring. For oil, differential and transmission drain plugs. (#117-0207) Fits: ... more info

Tool : B3676
Manufacturer : Baum Tools



Add:
OIL DRAIN WRENCH - 14mm HEX X 17mm BOX B3677

Use to service oil, differential and transmission drain plugs. Fits: M110, 107, 116,117, 123, 124,126, 129, 140,170, 201, 202,208, 210, 220,615, 616, ... more info

Tool : B3677
Manufacturer : Baum Tools



Add:
PILOT BEARING PULLER - 10mm - 25mm W1088

Universal pilot bearing and bushing puller. Particularly narrow format and sharp lip allows access to even the hardest to get at bushings and ... more info

Tool : W1088
Manufacturer : Baum Tools



Add:
REAR CRANKSHAFT RADIAL SEAL INSTALLER 111-0843

Tool for pressing rear crankshaft radial seal into position on crankshaft. Additional sleeve with 3 mm offset to the inside for later models. Fits: ... more info

Tool : 111-0843
Manufacturer : Baum Tools



Add:
SHORT HEX HEAD SOCKET - 1/2 DRIVE KO4012M

Short hex head sockets for access to tight locations. Sizes available 4, 5, 6, 8, 10, 12, 14, 17 and 19mm. 12, 17 and 19mm most common for Mercedes. ... more info

Tool : KO4012M
Manufacturer : Baum Tools



Add:
ST51-27 DRIVE SHAFT SOCKET - 27mm

12 point 1/2 DR. socket for loosening and tightening the center bolt of the crankshaft. All models except 100. Fits: All

Tool : ST51-27
Manufacturer : Baum Tools



Add:
VIBRATION DAMPER COUNTER-HOLDER 112-0040

Holds vibration damper when loosening and tightening center bolt. Handle can be extended with commercially available pipe, e.g. 3/4 din 2441. DOES ... more info

Tool : 112-0040
Manufacturer : Baum Tools



Add:
VIBRATION DAMPER COUNTER-HOLDER 271-0040

Holds vibration damper when loosening and tightening center bolt. Handle can be extended with commercially available pipe, e.g. 3/4 din 2441, ... more info

Tool : 271-0040
Manufacturer : Baum Tools



Add: