07-Injection System

Product Image Item Name- Price
A0201 BREAK-OUT BOX - 60-PIN W/CASE

Basic 60 pin break out box to test the contacts, continuity, inputs and outputs of a variety of electronic control units. Adapters are available for ... more info

Tool : A0201
Manufacturer : Baum Tools



Add:
A0202 BREAK-OUT BOX - 120-PIN W/CASE

Basic 120 pin break out box to test the contacts, continuity, inputs and outputs of a variety of electronic control units. Adapters are available for ... more info

Tool : A0202
Manufacturer : Baum Tools



Add:
A020201 25-PIN BOSCH BREAK OUT BOX CABLE

LE1, LU1, LE2, LU2, Mono-Jetronic A2.2, Mono-Jetronic A2.3, KE1, KE2, KE3.1, KE3.5, D-Jet, LH2.0-2.2 Fits: All

Tool : A020201
Manufacturer : Baum Tools



Add:
A020202 35 BOSCH PIN BREAK OUT BOX CABLE

ML1.1, ML1.2, ML1.3, ML2, ML3.1, ML3.2, ML3.3, ML4.1, MP3.1, MK1.1, MK1.2, MK1.3, MA1.2, MA1.7, K-Jet, KE3.2, KE3.3, LH1, LH2.3, LH2.4, LH3.1, ... more info

Tool : A020202
Manufacturer : Baum Tools



Add:
COPPER WASHERS 1318/10

8, 10 or 12mm Diameter Fits: All

Tool : 1318/10
Manufacturer : Baum Tools



Add:
FEMALE ADAPTERS 1318/5

Female to Male adapters. Sizes available 8x1mm x 12x1.5mm, 10x1mm x 12x1.5mm, 12x1.5mm x 12x1.5mm, 14x1.5mm x 12x1.5mm. Please specify size when ... more info

Tool : 1318/5
Manufacturer : Baum Tools



Add:
FUEL INJECTION PRESSURE GAUGE - ECONOMY KIT 1318R

Checks charging (supply), running and leakage pressures of all types of injection systems. Includes: Gauge (160psi/1100kpa) 3 way switch, hoses and ... more info

Tool : 1318R
Manufacturer : Baum Tools



Add:
FUEL INJECTION PRESSURE TEST - MASTER KIT 1318KIT

Checks charging (supply), running and leakage pressures of all types of injection systems. Includes: Gauge (160psi/1100kpa), 3-way switch, all hoses, ... more info

Tool : 1318KIT
Manufacturer : Baum Tools



Add:
FUEL INJECTION PRESSURE TESTER ADAPTERS 1318K

Various adapters for use with the #1318R pressure tester. Sizes range from 6mm to 14mm male, female and butt end. Hoses and gauges also available. ... more info

Tool : 1318K
Manufacturer : Baum Tools



Add:
FUEL LINE CLAMP - 30mm ST12975

Use to block off fuel line when working on fuel system or removing engine. Fits: All

Tool : ST12975
Manufacturer : Baum Tools



Add:
GAS TANK SOCKET - 46mm M0035A

Use to remove fuel tank filter body and fuel gauge sending units. Fits: All

Tool : M0035A
Manufacturer : Baum Tools



Add:
HEX HEAD BIT - 22mm T13-22

Use to remove gas tank drain plugs on late model cars. 22mm. Fits: All from 1980 to present

Tool : T13-22
Manufacturer : Baum Tools



Add:
LH FUEL PRESSURE HOSE 119-0463

With 7/16-20 tapered SAE angled connection and 12 x 1.5mm union nut. For LH fuel injection system (use with tester #103-0021). Fits: M104, 111, 112, ... more info

Tool : 119-0463
Manufacturer : Baum Tools



Add:
MALE ADAPTER - 10X1mm X 12X1.5mm 1318/4

Male to Male adapter with dual conical fittings. Fits: All

Tool : 1318/4
Manufacturer : Baum Tools



Add:
MALE ADAPTERS 1318/6

Male to Male adapters. Sizes available 8x1mm X 10x1mm, 8x1mm X 12x1.5mm, 8x1mm X 12x1.5mm X 70mm, 12x1.5mm x 12x1.5mm, 14x1.5mm x 12x1.5mm. Please ... more info

Tool : 1318/6
Manufacturer : Baum Tools



Add:
MOUNTING LEVER 140-0133

For module from module box. Fits: M104, 119, 120

Tool : 140-0133
Manufacturer : Baum Tools



Add:
OBD-II BREAK OUT BOX OBD2-BOB

This J1962 break out box allows access to all wires in the OBD-II / EOBD III Diagnostic Interface This makes it easy to trace CAN Bus faults, Power ... more info

Tool : OBD2-BOB
Manufacturer : Baum Tools



Add:
ST10507NKK-3 CO ADJUSMENT HEX SCREWDRIVER - 3mm X 380mm long

Use to adjust CO and idle mixture control screw on fuel injection distributor. BMW #131020 Fits: M10, M20

Tool : ST10507KK-3
Manufacturer : Baum Tools



Add:
ST11085 CARBURETOR JET REAMERS 0.33 - 2.00mm

Tapered reamers to allow precision reaming of carburetor main jets. Set includes 13 reamers and pin vice. Fits: All carbureted .

Tool : ST11085
Manufacturer : Baum Tools



Add:
TEST HARNESS - IDLE SPEED CONTROL VALVE 102-0463

Tests electronic idle speed control with standard multimeter. (VOM-DMM) (BMW #900311) Fits: M10, M20, M30

Tool : 102-0463
Manufacturer : Baum Tools



Add:
THREADED BANJO RINGS 1318/8

Threaded banjo rings for testing in tight spots. Sizes available 8mm X 10x1.5mm Male, 10mm X 12x1.5mm. Specify size when ordering. Fits: All

Tool : 1318/8
Manufacturer : Baum Tools



Add:
THROTTLE POTENTIOMETER TESTER M501

Test the throttle potentiometer used in all late model engines. Fits: All

Tool : M501
Manufacturer : Baum Tools



Add:
V6 ENGINE SPARK PLUG BOOT PULLER B110-0101

Special angle design with 17mm wrench to be a lever for removing and installing the wires Fits: M110/ML

Tool : B110-0101
Manufacturer : Baum Tools



Add: