28-Ignition System

Product Image Item Name- Price
A0201 BREAK-OUT BOX - 60-PIN W/CASE

Basic 60 pin break out box to test the contacts, continuity, inputs and outputs of a variety of electronic control units. Adapters are available for ... more info

Tool : A0201
Manufacturer : Baum Tools



Add:
A0202 BREAK-OUT BOX - 120-PIN W/CASE

Basic 120 pin break out box to test the contacts, continuity, inputs and outputs of a variety of electronic control units. Adapters are available for ... more info

Tool : A0202
Manufacturer : Baum Tools



Add:
A020202 35 BOSCH PIN BREAK OUT BOX CABLE

ML1.1, ML1.2, ML1.3, ML2, ML3.1, ML3.2, ML3.3, ML4.1, MP3.1, MK1.1, MK1.2, MK1.3, MA1.2, MA1.7, K-Jet, KE3.2, KE3.3, LH1, LH2.3, LH2.4, LH3.1, ... more info

Tool : A020202
Manufacturer : Baum Tools



Add:
B1594 CONNECTOR TEST KIT

Over 100 connectors to Safely probe out different plugs Components and control units Fits: All

Tool : B1594
Manufacturer : Baum Tools



Add:
Ignition Coil Output Stage Puller T10094A

Introduction of the new ignition coil with final output stage 036 905 715 C a new puller #T10094A is necessary. Special Tool #T10094A fully covers ... more info

Tool : T10094A
Manufacturer : Baum Tools



Add:
Ignition Coil Pack Puller Set Vag-CPK

This kit contains all the ignition coil pullers for servicing inegrated coil, powerstage sparkplugs. Includes: #T10166, #T10094A, #T10095A and ... more info

Tool : Vag-CPK
Manufacturer : Baum Tools



Add:
Ignition Coil Puller T10166

Used for removal and fitting of ignition coils with final output stage. Used on 8-cyl. (W8) and 12-cyl. (W12 injection engines) Fits: VW - Passat ... more info

Tool : T10166
Manufacturer : Baum Tools



Add:
Ignition Coil Puller T10095A

For removing and assembly of ignition coils with final output stage. 2.8-liter, VR6,4-valve engines. Fits: VW - VR6 Engine

Tool : T10095A
Manufacturer : Baum Tools



Add:
OBD-II BREAK OUT BOX OBD2-BOB

This J1962 break out box allows access to all wires in the OBD-II / EOBD III Diagnostic Interface This makes it easy to trace CAN Bus faults, Power ... more info

Tool : OBD2-BOB
Manufacturer : Baum Tools



Add:
RESISTANCE SUBSTITUTION BOX B1630

Resistance substitution box allows testing and calibration of dash gauges, injection system sensors, cruise control, and anti theft systems. Fits: All

Tool : B1630
Manufacturer : Baum Tools



Add:
Spark Plug Connector Tool T10029

Used when removing / installing spark plug wire connectors. Updated version that replaces #3277A. Fits: AUDI, VW - All

Tool : T10029
Manufacturer : Baum Tools



Add:
Spark Plug Wire Tool T10112

Special tool for removing and installing spark plug wires in engines with deep spark plug ports. Replaces #3277A for 4 cylinder models. Fits: AEG, ... more info

Tool : T10112
Manufacturer : Baum Tools



Add:
T40039 Coil Puller

Used for removal and assembly of ignition coils with final output stage. Fits: AWA, ASN, BBK

Tool : T40039
Manufacturer : Baum Tools



Add:
TERMINATOR BT7205J

The Terminator is a superior Logic probe combining the features of a DMM and oscilloscope but simplifying the display for technicians that want to ... more info

Tool : BT7205J
Manufacturer : Baum Tools



Add: