35-Rear Axle

Product Image Item Name- Price
111-0507 GROOVE NUT SOCKET - MAINSHAFT

Removes transmission main shaft groove nut. Fits: G76/18, G76/18A, G76/27, G76/27A, G76/27-5

Tool : 111-0507
Manufacturer : Baum Tools

$80.81


Add:
124-0543 WHEEL BEARING REMOVER & INSTALLER TOOL

Puller and installer tool for wheel bearing in wheel carrier and installation of rear axle shaft flange. Fits: W124, 203, 210, 211 & 220

Tool : 124-0543
Manufacturer : Baum Tools

$233.00


Add:
201-0009 PINION FLANGE SOCKET - 27mm 3/4 DRIVE

Pinion joint flange 12 point socket. Use to remove special retaining nut in late model cars. Fits: W124, 170, 201, 202, 210

Tool : 201-0009
Manufacturer : Baum Tools

385-0007 GROOVE NUT SOCKET

Use to remove and install the retaining nut on the supporting joint of the bottom wishbone in the front and rear axle. Fits: W163

Tool : 385-0007
Manufacturer : Baum Tools

$99.45


Add:
915-0107 DRIVESHAFT GROOVE NUT SOCKET

Removes the output shaft nut on manual transmissions. Fits: 716.0/1/2, 717.0/40

Tool : 915-0107
Manufacturer : Baum Tools

915-0207 REAR AXEL BEARING GROOVE NUT SOCKET

Rear axle bearing retainer groove nut socket. Fits: W107, 114, 115, 116, 123, 126

Tool : 915-0207
Manufacturer : Baum Tools

$73.72


Add:
966-0043 DIFFERENTIAL MOUNT BUSHING REPLACEMENT KIT

Use to remove and install the rear differential mount bushings. Fits: W124, 140

Tool : 966-0043
Manufacturer : Baum Tools

$187.00


Add:
B117-0207 OIL DRAIN WRENCH - 14mm HEX X 13mm BOX

Use for oil service on later models requiring longer bit and smaller ring. For oil, differential and transmission drain plugs. (#117-0207) Fits: ... more info

Tool : B117-0207
Manufacturer : Baum Tools

B140-0333 REAR AXLE CARRIER BUSHING MOUNT R & R KIT

Use to remove and install the front and rear rubber sub frame mount on the rear axle carrier. Fits: W140, 220

Tool : B140-0333
Manufacturer : Baum Tools

$398.00


Add:
B163-0243 DIFFERENTIAL MOUNT BUSHING R&R KIT W163

Used to remove and replace the transverse differential mount bushing (front rubber mount on the rear axle assembly) on Mercedes W163 vehicles. Fits: ... more info

Tool : B163-0243
Manufacturer : Baum Tools

B202-0043 Lower Control Arm Bshing Kit

Use to remove and install the rear axle carrier mount bushing Fits: W124, 129, 140, 170, 171, 201, 202, 203, 208, 209, 210, 215, 220, 240

Tool : B202-0043
Manufacturer : Baum Tools

$189.45


Add:
B203-0043 REAR AXLE CARRIER MOUNT BUSHING KIT

This tool kit allows easy removal and installation of the rear carrier mount front and rear bushings. Fits: W203, 209, R171

Tool : B203-0043
Manufacturer : Baum Tools

$389.45


Add:
B204-0043 204 Rear Subframe Bushing R&I Tool Kit

Use to remove and install the rear subframe to body bushings on the 204 chassis.

Tool : b204-0043
Manufacturer : Baum Tools

$398.65


Add:
B204-0143 204 Differential Bushing Kit

Use to remove the differential bushing Fits: 204

Tool : B204-0143
Manufacturer : Baum Tools

$297.88


Add:
B210-0243 DIFFERENTIAL MOUNT BUSHING REPLACEMENT KIT

Use to remove and install rubber differential mount bushings in the center of rear axle assembly. Fits: W210

Tool : B210-0243
Manufacturer : Baum Tools

$159.95


Add:
B221-0043 221 Subframe Busing Remover and Installer Kit

Use to remove and install the rear subframe bushings on the 221 chassis.

Tool : B221-0043
Manufacturer : Baum Tools

$472.50


Add:
B221-0143 221 Differential Bushing Kit

Use to remove and install the rear differential bushings. Fits: 221

Tool : B221-0143
Manufacturer : Baum Tools

$385.42


Add:
B234MASTER UNIVERSAL HYDRAULIC AXLE & SLIDE HAMMER HUB REMOVER

Hydraulically driven, this kit quickly pushes the axle out of the hub, and removes the hub. Includes hydraulic ram, 4 lug and 5 lug adapters, and ... more info

Tool : B234MASTER
Manufacturer : Baum Tools

$468.77


Add:
B90K WHEEL BEARING KIT

Use to remove and install wheel bearings out of the hub while still on the car. Fits: All

Tool : B90K
Manufacturer : Baum Tools

$369.71


Add:
INTERNAL EXTRACTORS KK21

Large range of internal extractors for use with #KK22-1 and KK22-2. Sizes range from 5mm to 100mm in diameter. Fits: All

Tool : KK21-1
Manufacturer : Baum Tools

KK22-2 INTERNAL EXTRACTOR COUNTER STAY - LARGE

Large counter stay for use with Kukko extractor #KK21-3 thru #KK21-8. Fits: All

Tool : KK22-2
Manufacturer : Kukko

$127.74


Add:
KO4012M-14 OIL DRAIN HEX HEAD SOCKET 14mm 1/2 DRIVE

1/2 drive stubby hex 14mm socket for oil drain plugs Fits: All

Tool : KO4012M-14
Manufacturer : Koken

ST3004 CYLINDER HEAD SOCKET 12mm XZN X 55mm 1/2 DR.

XZN Hex Head Socket-12mm x 55mm 1/2 drive with special short format for cylinder head bolts. Fits: 104, 112, 113, 119, 120

Tool : ST3004
Manufacturer : Stahlwille

ST51-30 THIN WALL DEEP SOCKET - 30mm

Removes drive shaft output flange nut. Available sizes: 10mm-32mm Fits: All

Tool : ST51-30
Manufacturer : Stahlwille

$50.46


Add: