BMW

Product Image Item Name- Price
113430 CAMSHAFT TURNING TOOL

Use to rotate camshafts into position for installation or removal. Fits: M60, M62

Tool : 113430
Manufacturer : Baum Tools

113460 ANGLE POSITION GAUGE

Graduated disk for mounting on counter holder #112450 (M60, M62) or on #112420 (M73) for torquing central bolt. Fits: M60, M62, M73

Tool : 113460
Manufacturer : Baum Tools

$46.27


Add:
114180 FLYWHEEL MOUNT BOLT TORX SOCKET - T60

TORX bolt socket for mounting bolts on ZMS flywheel mount with dual mass flywheels. See #113380 for models to 12/93 production. Fits: M60, M62, S62

Tool : 114180
Manufacturer : Baum Tools

$79.17


Add:
114285 Camshaft Gauge N55

Use with B114280KIT for N55 Fits: N55

Tool : 114285
Manufacturer : Baum Tools

$75.45


Add:
114290 CAMSHAFT SENSOR GEAR DISCONNECT GAUGE

Use when disassembling the camshaft or realigning the camshaft. Fits: N52

Tool : 114290
Manufacturer : Baum Tools

114450 Link Pin lock Tool

Used to lock the link blocks in place during assembly N20/26/52/55 engines

Tool : 114450
Manufacturer : Baum Tools

$169.68


Add:
115140 BALANCE SHAFT LOCK PLATE - NEW STYLE

Aligns the balance shaft in the TDC position during assembly and disassembly. Fits: N46

Tool : 115140
Manufacturer : Baum Tools

$48.75


Add:
117030 OXYGEN SENSOR CCROWFOOT SOCKET - 22mm

Special open sided socket to aid in the R&R of oxygen sensors. Insert head 9x12mm. Particularly useful on engines with low exhaust clearance. Use ... more info

Tool : 117030
Manufacturer : Baum Tools

117120 Camshaft Securing Pins

Used to set S62 camshafts in place during timing chain replacement or engine timing procedure. [set of 4 pins] Fits: S62

Tool : 117120
Manufacturer : Baum Tools

$88.74


Add:
117380 CHAIN TENSIONER STRETCH TRESTLE - V8 (M62)

Use with # 114230. Fits: M62

Tool : 117380
Manufacturer : Baum Tools

$63.25


Add:
118180 BMW Flywheel Holder

BMW Flywheel Holder M47T2, M47TU, M57TU, M67, N45, N45T, N46, N46T, N51, N52, N53, N54, N55, W17

Tool : 118180
Manufacturer : Baum Tools

$169.75


Add:
119110 CAMSHAFT GAUGE ADD-ON

Additional camshaft gauge half for #113240 to locks intake side at 6 degrees during timing adjustment. Use with #113240 for M44 models with rough ... more info

Tool : 119110
Manufacturer : Baum Tools

119130 CAMSHAFT LEAD ANGLE GAUGE

For setting camshaft lead angle (1.5 degree) (control diagram) when installing VANOS adjustment unit on S50B32. 2Liter and S54 Motorsport Engines. ... more info

Tool : 119130
Manufacturer : Baum Tools

119140 CAMSHAFT TIMING GAUGE

For checking camshaft timing when installing VANOS adjustment unit on S54 Motorsport Engines. Fits: S54

Tool : 119140
Manufacturer : Baum Tools

119150 SPECIAL WRENCH ADAPTER

Special swivel adapter for the O2 sensor crowfoot to get at difficult to access O2 sensors, such as that found on the S54 M3 vehicles. Fits: M52, ... more info

Tool : 119150
Manufacturer : Baum Tools

119185 N55 Adapter Ring for B119180

Use in conjunction with kit #B119180 for use on the N55 engine for the rear main seal. Piece comes with kit B119180PLUS

Tool : 119185
Manufacturer : Baum Tools

$35.45


Add:
119280 CRANKSHAFT COUNTERHOLDER

Crankshaft Counterholder for BMW and MINI N12 14 40 42 45 46 52 & 54 engines. Fits: N12, N14, N40, N42, N45, N46, N52 & N54

Tool : 119280
Manufacturer : Baum Tools

$84.96


Add:
119350 CAMSHAFT SENSOR GEAR DISCONNECT GAUGE

Use to disconnect the cam gear on New Generation 4 cylinder engines. Fits: N42, N46

Tool : 119350
Manufacturer : Baum Tools

$124.45


Add:
119460 CAMSHAFT ALIGNMENT JIGS

Aligns intake and exhaust cams in the proper timing position for assembly. Includes #119190. Specifically designed for New Generation V8 and V12 ... more info

Tool : 119460
Manufacturer : Baum Tools

$398.00


Add:
119900 Chain Tensioner for N63, S63,S63TU

Use to tension the timing chain when replacing the timing chain. Fits: N63, S63, S63TU

Tool : 119900
Manufacturer : Baum Tools

$159.45


Add:
121220 Sparkplug Socket 12 pt. 14mm

14mm 12 pt. sparkplug socket 3/8 dr." Fits: N12, N14, N45, N52, N53, N54. NOT FOR N51

Tool : 121220
Manufacturer : Baum Tools

$39.57


Add:
124 CONNECTING ROD CHISEL

Use to peen mounting nuts of connecting rods. Fits: All

Tool : 124
Manufacturer : Baum Tools

124010 DME ADJUSTING WRENCH

Pin for setting PCB switch on DME controller. Fits: M30

Tool : 124010
Manufacturer : Baum Tools

$67.75


Add:
126050 VANOS SOLENOID ACTIVATOR

Use to activate the VANOS solenoid during setup and timing. Use with cables from 126410 Fits: S54, S62

Tool : 126050
Manufacturer : Baum Tools

$327.79


Add:
126050 VANOS SOLENOID ACTIVATOR

Use to activate the VANOS solenoid during setup and timing. Use with cables from 126410 Fits: S54, S62

Tool : 126050
Manufacturer : Baum Tools

$327.79


Add: