Electrical General Tools

Product Image Item Name- Price
1315A/1 BOSCH TEST HARNESS - 2 PIN

Use to measure current in Idle Air Valve circuit. Fits: M10, M20, M30

Tool : 1315A/1
Manufacturer : Baum Tools

611300 OUTSIDE MIRROR REMOVAL PLIERS

Use to remove the retainer on the outside mirror. Fits: E12, E21, E23, E24, E28, E30, E31, E32, E34, E36, E38, E39

Tool : 611300
Manufacturer : Baum Tools

$68.59


Add:
611440 JETRONIC TEST CABLES

Use to test sensors on all Jetronic and Motronic injection systems. Use with standard VOM/DMM. Fits: All

Tool : 611440
Manufacturer : Baum Tools

613300 EWS ANTENNA WRENCH

Use to remove the EWS antenna ring from the ignition lock. Fits: E31, E32, E34, E36, E38, E39, E46, E52, E53, E60, E61, E63, E64, E83, E85, R50, R53

Tool : 613300
Manufacturer : Baum Tools

$123.36


Add:
616060 WINDSHIELD WIPER PULLER

Use to remove the windshield wiper arm. Special hinge allows easy access against windscreen. Fits: E24, E28, E30, E31, E32, E34, E36, E38, E39, E46, ... more info

Tool : 616060
Manufacturer : Baum Tools

$149.45


Add:
655400 NAVIGATION CONTROL UNIT RELEASE BRACKET

Use to remove and install navigation units and some radios.. Also in kit #B9059M Fits: E38, E39

Tool : 655400
Manufacturer : Baum Tools

9513 SPARK PLUG CONNECTOR PLIERS

Removes spark plug wires without damage. Fits: All

Tool : 9513
Manufacturer : Baum Tools

B1594 CONNECTOR TEST KIT

Over 100 connectors to Safely probe out different plugs Components and control units Fits: All

Tool : B1594
Manufacturer : Baum Tools

$329.65


Add:
B1630 RESISTANCE SUBSTITUTION BOX

Resistance substitution box allows testing and calibration of dash gauges, injection system sensors, cruise control, and anti theft systems. Fits: All

Tool : B1630
Manufacturer : Baum Tools

$89.45


Add:
B3400KIT ALTERNATOR PULLEY KIT

Alternator pulley (Freewheel) removal and installation tool kit. Fits: Bosch, Denso, Valeo and Magneti Marelli

Tool : B3400KIT
Manufacturer : Baum Tools

$97.65


Add:
B3400PLUS ALTERNATOR PULLEY TOOL KIT

Alternator pulley (Freewheel) removal and installation tool kit. Fits: Bosch, Denso, Valeo and Magneti Marelli

Tool : B3400PLUS
Manufacturer : Baum Tools

$187.96


Add:
B4750BO 5 POINT TORX PLUS BITS

Used commonly on various control modules and sensors. T10, 15, 20, 25, 27, 30, 40, 45, 50 Fits: ALL

Tool : B4750BO
Manufacturer : Baum Tools

$26.84


Add:
B57BG-E WIRE TERMINAL&CONNECTOR CRIMPING KIT ECONOMY

This kit includes the basic crimper and 3 interchangeable crimping heads. Fits: All

Tool : B57BG-E
Manufacturer : Baum Tools

$84.95


Add:
B57BG-M WIRE TERMINAL&CONNECTOR CRIMPING MASTER KIT

This kit includes the basic crimper and 5 interchangeable MAGNETIC crimping heads. Also has a handy one handed wire stripper. Crimps barrel, butt, ... more info

Tool : B57BG-M
Manufacturer : Baum Tools

$129.20


Add:
B616010 Torx Bit for Wiper Linkage

Use for loosening and tightening windshield wiper. T80 Torx Fits: E30, E38, E39

Tool : B616010
Manufacturer : Baum Tools

B70A 70amp POWER SUPPLY

Provides constant clean power from 13.0 to 14.8V DC for programming. Fits: All POWER SUPPLY FEATURES Constant voltage output selectable from 13.0 to ... more info

Tool : B70A
Manufacturer : Baum Tools

$658.82


Add:
BT7205J TERMINATOR LOGIC PROBE

The Terminator is a superior Logic probe combining the features of a DMM and oscilloscope but simplifying the display for technicians that want to ... more info

Tool : BT7205J
Manufacturer : Baum Tools

$179.45


Add:
DBL800 DEUTRONIC POWER SUPPLY

Microprocessor controlled charger/power supply to maintain power levels during programming and diagnostics. Microprocessor controlled charging, ... more info

Tool : DBL800
Manufacturer : Baum Tools

OBD2-BOB OBD-II BREAK OUT BOX

This J1962 break out box allows access to all wires in the OBD-II / EOBD III Diagnostic Interface This makes it easy to trace CAN Bus faults, Power ... more info

Tool : OBD2-BOB
Manufacturer : Baum Tools

$98.45


Add:
ST1501/1511 CONTACT EXTRACTOR (ROUND) - 1.5mm

Use to remove the round contacts with locking feathers. Replaceable tips available as #ST1511. Also in kit #ST1550. Fits: All

Tool : ST1501/1511
Manufacturer : Stahlwille

ST1502/1512 CONTACT EXTRACTOR (ROUND) - 3.5mm

Use to remove the round contacts with locking feathers. Replaceable tips available as #ST1512. Also in kit #ST1550. Fits: All

Tool : ST1502/1512
Manufacturer : Baum Tools

ST1504/1514 CONTACT EXTRACTOR (ROUND) - 2.5mm

Use to remove the round contacts with locking feathers. Replaceable tips available as #ST1514. Also in kit #ST1550. Fits: All

Tool : ST1504/1514
Manufacturer : Stahlwille

ST1550BMW KABLEX CONNECTOR KIT - BMW

Includes: Round contact pin extractor 1.5mm, 2.5mm & 3.5mm, Flat plug contact removers for 1.5mm, 1.9mm & 2.8mm and 2-prong contacts 2.8mm & 5.8mm. ... more info

Tool : ST1550BMW
Manufacturer : Baum Tools

ST1553N CONTACT EXTRACTOR (FLAT) - 2.8, 5.8mm

Use to remove double size flat contacts with single release channel. Fits: All

Tool : ST1553N
Manufacturer : Stahlwille

ST1554N CONTACT EXTRACTOR (FLAT) - 2.8mm

Use to remove single size flat contacts with single release channel. Also in kit #ST1550. Fits: All

Tool : ST1554N
Manufacturer : Stahlwille