Engine Electrical Tools

Product Image Item Name- Price
124010 DME ADJUSTING WRENCH

Pin for setting PCB switch on DME controller. Fits: M30

Tool : 124010
Manufacturer : Baum Tools



Add:
A0201 BREAK-OUT BOX - 60-PIN W/CASE

Basic 60 pin break out box to test the contacts, continuity, inputs and outputs of a variety of electronic control units. Adapters are available for ... more info

Tool : A0201
Manufacturer : Baum Tools



Add:
A0202 BREAK-OUT BOX - 120-PIN W/CASE

Basic 120 pin break out box to test the contacts, continuity, inputs and outputs of a variety of electronic control units. Adapters are available for ... more info

Tool : A0202
Manufacturer : Baum Tools



Add:
A020201 25-PIN BOSCH BREAK OUT BOX CABLE

LE1, LU1, LE2, LU2, Mono-Jetronic A2.2, Mono-Jetronic A2.3, KE1, KE2, KE3.1, KE3.5, D-Jet, LH2.0-2.2 Fits: All

Tool : A020201
Manufacturer : Baum Tools



Add:
A020202 35 BOSCH PIN BREAK OUT BOX CABLE

ML1.1, ML1.2, ML1.3, ML2, ML3.1, ML3.2, ML3.3, ML4.1, MP3.1, MK1.1, MK1.2, MK1.3, MA1.2, MA1.7, K-Jet, KE3.2, KE3.3, LH1, LH2.3, LH2.4, LH3.1, ... more info

Tool : A020202
Manufacturer : Baum Tools



Add:
GLOW PLUG SOCKET - 12mm 122100

Use to remove pencil type diesel glow plugs. Fits: M21, M41, M5121

Tool : 122100
Manufacturer : Baum Tools



Add:
OBD-II BREAK OUT BOX OBD2-BOB

This J1962 break out box allows access to all wires in the OBD-II / EOBD III Diagnostic Interface This makes it easy to trace CAN Bus faults, Power ... more info

Tool : OBD2-BOB
Manufacturer : Baum Tools



Add:
SECONDARY VOLTAGE MEASUREMENT CLIP SET B127040

Use to measure secondary voltage on DIS (multiple coil) COP type systems. Fits: M42, M43, M44, M50, M52, M60, M62

Tool : B127040
Manufacturer : Baum Tools



Add:
SPARK PLUG SOCKET SPINNER - 3/8 DR." 67

Large plastic grip makes it easy to remove plugs from the most difficult locations. Fits: All

Tool : 67
Manufacturer : Baum Tools



Add:
SPARK PLUG WIRE PLIERS 103-0037

Use to remove ignition plug connectors without separating crimp. Fits: All

Tool : 103-0037
Manufacturer : Baum Tools



Add:
SPARKLUG SOCKET - 14mmX250mm 12 pt. B121220LONG

Sparkplug Socket - 14mm x 12 pt x 3/8 dr. x 250mm " Fits:N52, N53. NOT FOR N54, N51

Tool : B121220LONG
Manufacturer : Baum Tools



Add:
Sparkplug Socket 12 pt. 14mm 121220

14mm 12 pt. sparkplug socket 3/8 dr." Fits: N12, N14, N45, N52, N53, N54. NOT FOR N51

Tool : 121220
Manufacturer : Baum Tools

$1.00


Add:
Sparkplug Socket 12 pt. 14mm B121220

14mm 12pt. sparkplug socket 3/8 dr. with built in swivel." Fits: N12, N14, N45, N52, N53, N54, NOT FOR N51

Tool : B121220
Manufacturer : Baum Tools



Add:
TERMINATOR BT7205J

The Terminator is a superior Logic probe combining the features of a DMM and oscilloscope but simplifying the display for technicians that want to ... more info

Tool : BT7205J
Manufacturer : Baum Tools



Add:
TIMESERT SPARKPLUG REPAIR KIT 14X1.25mm TS4412

Solid insert kit from Timesert" allows quick and easy repair of sparkplug bores." Fits: All

Tool : TS4412
Manufacturer : Baum Tools



Add:
VANOS CONTROL ADAPTER 126410

Cable and adapter for VANOS control for external signaling of VANOS control when installing and function-checking the 4/2 way valve in conjunction ... more info

Tool : 126410
Manufacturer : Baum Tools



Add:
VANOS SOLENOID ACTIVATOR 126050

Use to activate the VANOS solenoid during setup and timing. Use with cables from 126410 Fits: S54, S62

Tool : 126050
Manufacturer : Baum Tools



Add:
WOBBLE EXTENSION - 3/8 34mm LONG" 67A/1

'Wobbly' extension to remove difficult to access spark plugs. Fits: All

Tool : 67A/1
Manufacturer : Baum Tools



Add: