Engine Tools

Product Image Item Name- Price
REAR CRANKSHAFT SEAL DRIFT 111260

Installs flywheel end crankshaft seal. Use with seal protector # 112213. Fits: M10, S14, M20, M21, M30, S38, M40, M41, M42, M43, M44, M47, M50, M51, ... more info

Tool : 111260
Manufacturer : Baum Tools

REAR CRANKSHAFT SEAL GUIDE SLEEVE 112390

Allows seals to easily slide over rear (flywheel end) of crankshaft. Fits: M60, M62, M70, M73

Tool : 112390
Manufacturer : Baum Tools

RIGID CHAIN TENSIONOR 114220

Use to tension primary chain. Fits: M52, M52TU, M54, M56

Tool : 114220
Manufacturer : Baum Tools

$48.56


Add:
RIGID CHAIN TENSIONOR 114230

Use to tension primary chain. Short format for late model V8 also for M3. Fits: M60, M62, M62VAN, S50B30

Tool : 114230
Manufacturer : Baum Tools

$39.38


Add:
RIGID CHAIN TENSIONOR 119340

Use to tension primary chain. Short format for late model new generation engines. Use with #114280 for cam alignment on N52. Fits: N40, N42, N52

Tool : 119340
Manufacturer : Baum Tools

$42.45


Add:
SEAL GUIDE SLEEVES - SET OF 2 112210

Allows seals to easily slide over front crankshaft, intermediate shaft and rear crankshaft. Fits: M10, S14, M20, M21, M30, S38, M40, M41, M42, M43, ... more info

Tool : 112210
Manufacturer : Baum Tools

SEAL INSTALLER 111220

Use to install seal in timing case cover. Fits: S50, M60, M62, M70

Tool : 111220
Manufacturer : Baum Tools

SEAL INSTALLER 111230

Use to install seal in rear crankshaft cover. Use with drift handle #005500. Fits: M60, M62, M70, M73

Tool : 111230
Manufacturer : Baum Tools

SECONDARY CHAIN ASSEMBLY FIXTURE 116180

Use for preassembling secondary chain sprockets with chain on camshafts. Also see B1160K Fits: M52TU, M54, M56

Tool : 116180
Manufacturer : Baum Tools

$119.00


Add:
SECONDARY CHAIN TENSIONER LOCKING CLIPS 113310

Use to secure the cam chain tensioner. Fits: M62

Tool : 113310
Manufacturer : Baum Tools

$11.85


Add:
SLIDE HAMMER TIP - 12X1mm W910A

Use on slide hammer #602-0033A to remove rocker shafts on 4 and 6 cylinder models. Fits: All to 1983

Tool : W910A
Manufacturer : Baum Tools

$31.45


Add:
SPACER SHIM 112410

Use with counter holder #112150 for removing crank bolt. Fits: M41, M44, M52

Tool : 112410
Manufacturer : Baum Tools

$60.59


Add:
SPECIAL THIN WRENCH - 32mm 115040

Use to loosening and tightening of the fan coupling nut long and thin. Use with holding tool #115050. . Also see kit #B9042. Fits: All

Tool : 115040
Manufacturer : Baum Tools

$41.50


Add:
ST11063 VALVE STEM SEAL PLIERS

Use to remove valve stem seals. Fits: All

Tool : ST11063
Manufacturer : Stahlwille

ST55-36VIBRATION DAMPER NUT SOCKET - 36mm 3/4 DRIVE"

Use this thin walled socket to remove pulley end nut with #112120 or #112160. (BMW #112180) Fits: M30

Tool : ST55-36
Manufacturer : Stahlwille

ST7380N TORQUE ANGLE PROTRACTOR - 1/2 DRIVE

Use for torquing stretch" type bolts used on flywheels Fits: cylinder heads and case bearings."

Tool : ST7380N
Manufacturer : Stahlwille

TDC LOCATING JIG - 12 Cylinder 113190

Use to align camshaft during removal and installation or changing chain. Fits: M70, M73

Tool : 113190
Manufacturer : Baum Tools

TEMPERATURE SENSOR CROWFOOT - 19mm ST540-19

Use to remove temperature sensors from tight locations. Particularly on M70 engines. (BMW #009160) Fits: All

Tool : ST540-19
Manufacturer : Stahlwille

TOP DEAD CENTER LOCATING PIN - X5 (V8) 115180

Aligns flywheel at top dead center. Use with #B112440 for cam alignment. Fits: M62, X5

Tool : 115180
Manufacturer : Baum Tools

$49.45


Add:
TOP DEAD CENTER LOCATING PIN 115120

Locks flywheel at Top Dead Center on new generation 4 and 6 cylinder engines. Fits: N45, N46, N52

Tool : 115120
Manufacturer : Baum Tools

TOP DEAD CENTER LOCATING PIN 119190

Locks flywheel at Top Dead Center on new generation 4 and 8 cylinder engines. Use with #119460 for V8. Fits: N40, N42, N62

Tool : 119190
Manufacturer : Baum Tools

$29.45


Add:
TOP DEAD CENTER PIN 112300

Aligns flywheel at top dead center. Use with #113240 and #112440 for cam alignment. Use with # 112090, # 135330, and # 135340 to set diesel timing. ... more info

Tool : 112300
Manufacturer : Baum Tools

$24.50


Add:
TS1015 TIMESERT KIT-10X1.5mm

Timesert kit for rethreading case when cylinder head bolts strip out. Use with alignment jig #B115000 and inserts #TS10155. Fits: M52TU, M54, M56

Tool : TS1015
Manufacturer : Time-Sert

$114.47


Add:
TS10155 TIMESERT INSERTS 10X1.5X24.5mm

Timesert inserts for case repair on BMW 6 cylinder engines from 1998 to 2005. Fits: M52TU, M54, M56 **Sold individual**

Tool : TS10155
Manufacturer : Time-Sert

$1.91


Add:
Universal Valve Spring Compessor B115140KIT

Universal valve spring compressor, designed also to work with many BMW engines. Fits: Universal, M52, M52TU, M54, M56, M60, M62, M62TU, N42, N52, ... more info

Tool : B115140KIT
Manufacturer : Baum Tools

$488.71


Add: