Manual Transmission Tools

Product Image Item Name- Price
212300 CLUTCH CENTERING TOOL 6/7 SPEED SMG

Used to center clutch disc on BMW 6/7 speed SMG transmissions in M5 & M6 vehicles produced between 2006 and 2010 Fits: M5 E60, M6 E63, and M6 E64 ... more info

Tool : 212300
Manufacturer : Baum Tools



Add:
EXTERNAL SNAP RING PLIERS - STRAIGHT ST6545

Removes external snap rings from housings. Available sizes: 140, 180, 210, 315mm. Fits: All

Tool : ST6545
Manufacturer : Baum Tools



Add:
EXTERNAL SNAP RING PLIERS 90 BEND ST6546

Removes internal snap rings from housings. Available sizes: 125, 170, 200, 290mm. Fits: All

Tool : ST6546
Manufacturer : Baum Tools



Add:
INTERNAL SNAP RING PLIERS 90 BEND ST6544

Removes internal snap rings from housings. Available sizes: 130, 170, 215, 300mm. Fits: All

Tool : ST6544
Manufacturer : Baum Tools



Add:
INTERNAL SNAP RING PLIERS STRAIGHT ST6543

Removes internal snap rings from housings. Available sizes: 140, 180, 225mm. Fits: All

Tool : ST6543
Manufacturer : Baum Tools



Add:
LOCKRING PLIERS ST6547

Removes and installs transmission output shaft clips. Fits: All

Tool : ST6547
Manufacturer : Baum Tools



Add:
OIL DRAIN WRENCH - 17mm HEX X 19mm BOX H2567-1

Use to remove gearbox drain and filler plugs with 17mm allen and oil pan drain plugs with 19mm box wrench. Fits: All

Tool : H2567-1
Manufacturer : Baum Tools



Add:
PULLING DEVICE KK18-1

Pulling device for usage with KK15 and KK17 series separators. Fits: All

Tool : KK18-1
Manufacturer : Baum Tools



Add:
SELECTOR SHAFT BUSHING DRIFT 231240

Use to install selector shaft seal in rear of transmission housing. Fits: 4HP22, 4HP24, A4S270R, A4S310R, A5S300J, A5S310Z, A5S440Z, A5S560Z, BW65, ... more info

Tool : 231240
Manufacturer : Baum Tools



Add:
SHORT HEX HEAD SOCKET - 17mm DRIVE KO4012M-17

Use to remove oil and transmission drain plugs. Fits: All

Tool : KO4012M-17
Manufacturer : Baum Tools



Add:
ST13-15 COMBINATION WRENCH - 15mm

Removes axle flange and drive shaft nuts. Available sizes: 5.5mm-60mm Fits: Most

Tool : ST13-15
Manufacturer : Baum Tools



Add:
ST21-21X24 DOUBLE BOX WRENCH - 21X24mm

Thin wrench for universal joint 12-point nut. Available sizes: 6mm-34mm Fits: All

Tool : ST21-21X24
Manufacturer : Baum Tools



Add:
THIN OPEN END WRENCH - 46mm T9A-46

Holds drive shaft and/or differential lock nut when removing drive shaft. Fits: E30

Tool : T9A-46
Manufacturer : Baum Tools



Add:
THIN WALL DEEP SOCKET - 30mm ST51-30

Removes drive shaft output flange nut. Available sizes: 10mm-32mm Fits: All

Tool : ST51-30
Manufacturer : Baum Tools



Add: