Mini Tools

Product Image Item Name- Price
118270 Crankshaft Adapter

Use with B118450 to remove vibration damper off crankshaft. Fits: W11

Tool : 118270
Manufacturer : Baum Tools



Add:
119570 Mini N18 Valve Spring Remover and Installer with Pliers

Used to remove and install the spring and intermediate levers on the N18 engine. Includes 119571, 119572, 119573 Use with timing kit B117440KIT.

Tool : 119570
Manufacturer : Baum Tools



Add:
119610 Mini Cooper N14 Rear Crank Radial Seal Installer

Used to install the rear crankshaft seal on the Mini Cooper N14 engine. Includes tool #'s 119611, 119612, 119613.

Tool : 119610
Manufacturer : Baum Tools



Add:
130250 Mini Fuel Line Disconnect Tool

Used to release the fuel line that connects to the high pressure pump. **WARNING** If the 2 little release tabs are broken off, you will need to ... more info

Tool : 130250
Manufacturer :



Add:
641040 AC BELT TOOL

AC belt stretch tool Fits: N62

Tool : 641040
Manufacturer : Baum Tools



Add:
B118250K CAMSHAFT TIMING KIT FOR MINI

Use to adjust camshaft timing during assembly. Fits: W10, W11

Tool : B118250K
Manufacturer : Baum Tools



Add:
B1924 AUTOMATIC TRANSMISSION FILLER KIT

For filling automatic transmissions. 7 Liter capacity. Fits: All

Tool : B1924
Manufacturer : Baum Tools



Add:
B1924PLUS AUTOMATIC TRANSMISSION FILLER KIT PLUS

For filling automatic transmissions. Plus kit has a 12.5 Liter capacity and can be manually pumped or operated with shop air. Fits: All

Tool : B1924PLUS
Manufacturer : Baum Tools



Add:
B312240K BALL JOINT PULLER

For removing control arms for steering knuckle Fits: R50, R52, R53, RR1

Tool : B312240K
Manufacturer : Baum Tools



Add:
B315150 CONTROL ARM BUSHING TOOL

Use to replace the rubber control arm bushings. Fits: R50, R52, R53, R55, R56

Tool : B315150
Manufacturer : Baum Tools



Add:
B3400KIT ALTERNATOR PULLEY KIT

Alternator pulley (Freewheel) removal and installation tool kit. Fits: Bosch, Denso, Valeo and Magneti Marelli

Tool : B3400KIT
Manufacturer : Baum Tools



Add:
B3400PLUS ALTERNATOR PULLEY TOOL KIT

Alternator pulley (Freewheel) removal and installation tool kit. Fits: Bosch, Denso, Valeo and Magneti Marelli

Tool : B3400PLUS
Manufacturer : Baum Tools



Add:
B4750BO 5 POINT TORX PLUS BITS

Used commonly on various control modules and sensors. T10, 15, 20, 25, 27, 30, 40, 45, 50 Fits: ALL

Tool : B4750BO
Manufacturer : Baum Tools



Add:
FUEL LEVEL SENDING UNIT SOCKET 161020

Use to remove and install the fuel level sending unit found on most late models. 1 Piece. For later models with side ridges use #203-0107. Fits: E31, ... more info

Tool : 161020
Manufacturer : Baum Tools



Add:
Fuel Pressure Adapter 131130

Used to measure the fuel pressure. Fits: All

Tool : 131130
Manufacturer : Baum Tools



Add:
MINI CONTROL ARM REMOVER AND INSTALLER B315140

Use to remove and install the control arm on the car Fits: R50, R52, R53

Tool : B315140
Manufacturer : Baum Tools



Add:
MINI COOPER (N14) TIMING TOOL SET B119550PLUS

Use to locate camshaft at TDC. Includes 119551, 119552, 119553, 119590, 119340 Fits: N12, N14

Tool : B119550PLUS
Manufacturer : Baum Tools



Add:
Mini Cooper Serpentine Belt Wrenches 116210

These are applicable to all 2007 and newer Mini Cooper models equipped with the N12, N14, N16 and N18 engines. Each set comes with a one large and ... more info

Tool : 116210
Manufacturer : Baum Tools



Add:
MINI N18 TIMING KIT B117440KIT

Used for camshaft timing on Mini N18 (Turbo) engines produced between 2011 to 2015. Fits: N18

Tool : B117440KIT
Manufacturer : Baum Tools



Add:
PRESS DOWN DEVICE 119660

For pressing down camshafts during removal and installation. Includes 119661, 119662 Fits: N14

Tool : 119660
Manufacturer : Baum Tools



Add:
Radiator Tester Kit BFZKIT

Radiator Tester Kit Fits: All

Tool : BFZKIT
Manufacturer : Baum Tools



Add:
SERPENTINE BELT TOOL B118390K

Use to hold the serpentine belt tensioner for belt replacement Fits: W10

Tool : B118390K
Manufacturer : Baum Tools



Add:
SERPENTINE BELT TOOL B118410K

Use to hold the serpentine belt tensioner for belt replacement Fits: W11, Supercharged

Tool : B118410K
Manufacturer : Baum Tools



Add:
UNIVERSAL HYDRAULIC AXLE AND SLIDE HAMMER HUB REMOVER B234MASTE

Hydraulically driven, this kit quickly pushes the axle out of the hub, and removes the hub. Includes hydraulic ram, 4 lug and 5 lug adapters, and ... more info

Tool : B234MASTER
Manufacturer : Baum Tools



Add:
VIBRATION DAMPER PULLER ADAPTER B118450

Use to hold and remove damper. Includes 118270 Fits: W11

Tool : B118450
Manufacturer : Baum Tools



Add: