Steering Tools

Product Image Item Name- Price
322040 BALLJOINT PULLER

Removes steering track rod ball joints from the steering gear (drop) arm and the steering idler arm. Fits: E24, E28, E34

Tool : 322040
Manufacturer : Baum Tools



Add:
323140 CAMBER ADJUSTER

Use this fixture to adjust the front camber on late model 3 series with KDS. Fits: E38, E39, E46, E53, E65, E66, E67, E85, E87

Tool : 323140
Manufacturer : Baum Tools



Add:
323160 CAMBER ADJUSTING WRENCH INSERT - 38mm

Use to set the camber on the front axle. Drive 9x12mm for torque wrench #ST730/5. Mfg. Stahlwille of Germany Fits: E53, E60, E61, E63, E64, E65, E66, ... more info

Tool : 323160
Manufacturer : Baum Tools



Add:
323170 AIRBAG LEVER

Use to pry airbag from steering wheel mount. Fits: E65, E66, E67

Tool : 323170
Manufacturer : Baum Tools



Add:
323190 CAMBER ADJUSTING TOOL

Use to adjust front camber. Fits: E60, E61, E63, E64

Tool : 323190
Manufacturer : Baum Tools



Add:
B312240K BALL JOINT PULLER

For removing control arms for steering knuckle Fits: R50, R52, R53, RR1

Tool : B312240K
Manufacturer : Baum Tools



Add:
HOSE CLAMP PLIERS ST10625

Pincer type pliers removes and fastens ear crimp type clamps. Fits: All

Tool : ST10625
Manufacturer : Baum Tools



Add:
HOSE CLIP PLIER - EARLESS ST10625/2

Use to close hose clips that do not have ears, such as found on shaft sleeves of VW, Audi, BMW, Mercedes and Toyota. Fits: All

Tool : ST10625/2
Manufacturer : Baum Tools



Add:
HYDRAULIC LINE LEVER 321030

Use to remove hydraulic lines from the steering gear assembly on models with plastic FCD caps. Fits: E60, E61, E63, E64, E65, E66, E67, E83, E85, E87

Tool : 321030
Manufacturer : Baum Tools



Add:
HYDRAULIC LINE TOOL 321300

Use to disconnect hydraulic lines on vehicles equipped with N73 V12 engines. Metal FDC clutches. Fits: E65, E67, E83

Tool : 321300
Manufacturer : Baum Tools



Add:
INTERNAL EXTRACTOR COUNTER STAY - LARGE ST11061-2

Large counter stay for use with Stahlwille extractor ST11060-3 thru ST11060-7. (BMW #008552) Fits: All

Tool : ST11061-2
Manufacturer : Baum Tools



Add:
INTERNAL EXTRACTOR COUNTER STAY - SMALL ST11061-1

Small counter stay for use with Stahlwille extractor ST11060-0 thru ST11060-2. (BMW #008512) Fits: All

Tool : ST11061-1
Manufacturer : Baum Tools



Add:
PITMAN ARM PULLER ST11055-2

Use to remove pitman arm. (BMW #008500) Fits: All

Tool : ST11055-2
Manufacturer : Baum Tools



Add:
POWER STEERING PUMP WRENCH - 17X19mm ST24-17X19

Special reinforced line wrench for power steering pressure lines. Fits: E12, E21, E23, E24, E28, E30, E31, E32, E34, E36, E38, E39

Tool : ST24-17X19
Manufacturer : Baum Tools



Add:
SNAP-RING DRIVER 321090

For installing upper snap-ring on steering spindle when securing steering wheel with nut Fits: E34, E31, E32, E36, E38, E39

Tool : 321090
Manufacturer : Baum Tools



Add:
SPECIAL THIN WRENCH - 27mm T9A-27

Use to remove LEFT tie rod mount. Fits: E21, E30

Tool : T9A-27
Manufacturer : Baum Tools



Add:
SPECIAL THIN WRENCH - 32mm T9A-32

Use to remove RIGHT tie rod mount. Extra thin. Fits: E21, E30, E36, E65, E66

Tool : T9A-32
Manufacturer : Baum Tools



Add:
STEERING ANGLE SENSOR INSTALLER 323040

Slip bushing for installing the steering angle sensor on the steering column. Fits: E46, E85

Tool : 323040
Manufacturer : Baum Tools



Add:
STEERING COLUMN IGNITION LOCK RELEASE PIN 323110

Use to release lock detent when removing steering wheel lock cylinder. Fits: E31, E32, E34, E36, E38, E39, Z3, E46, E60, E61, E63, E64, E83, E85, ... more info

Tool : 323110
Manufacturer : Baum Tools



Add:
STEERING COLUMN SET NUT CROWFOOT 323100

Crowfoot for setting nut on steering spindle with adjustable steering column. Use with 002050. Not for E38 or E39 models. Fits: E12, E21, E23, E24, ... more info

Tool : 323100
Manufacturer : Baum Tools



Add:
STEERING KNUCKLE CONTROL ARM PULLER B312240

Use to remove the control arms from the steering knuckle Fits: E39

Tool : B312240
Manufacturer : Baum Tools



Add:
TAMPER PROOF TORX BIT - T30 ST1445

Special bit with borehole for releasing and tightening Airbag sensor on wheel house and roll bar sensor on the E36 convertible. Fits: All

Tool : ST1445
Manufacturer : Baum Tools



Add:
TIE ROD BALL JOINT PULLER 23-45mm ST11041-2

Puller for separating tie rod and steering knuckle ball joints without tearing ball joint boots. Mfg. by Stahlwille of Germany. Fits: Universal

Tool : ST11041-2
Manufacturer : Baum Tools



Add:
TOE-IN ADJUSTER 323030

Setting tool for adjusting toe-in at rear axle on models with KDS. E36 from 3/98. Fits: E36, E46, E85

Tool : 323030
Manufacturer : Baum Tools



Add:
TOE-IN SETTING TOOL 323080

For setting toe-in on rear axle-rear axle with KDS. Fits: E36, Z3

Tool : 323080
Manufacturer : Baum Tools



Add: