VW/Audi

Product Image Item Name- Price
10-222A ENGINE SUPPORT BRIDGE

Holds engine in place when front axle or transmission is removed. Full 1830mm/6 foot wide. Fits: All

Tool : 10-222A
Manufacturer : Baum Tools



Add:
2065A Diesel Camshaft Lock

Holds cam in place during R&R of injection pump and timing belt and while setting timing on diesel and some gas engines. Fits: VW - 1V, 1Z, AAB, ACV, ... more info

Tool : 2065A
Manufacturer : Baum Tools



Add:
2065A Diesel Camshaft Lock

Holds cam in place during R&R of injection pump and timing belt and while setting timing on diesel and some gas engines. Fits: VW - 1V, 1Z, AAB, ACV, ... more info

Tool : 2065A
Manufacturer : Baum Tools



Add:
2066 Diesel Dial Gauge Adapter

Use to check and adjust injection pump timing. Use with #20A dial indicator. Fits: 1V, 1Z, AAB, ACV, AHU, AWP, AWV, CS, CY, DE, MD, ME, MF

Tool : 2066
Manufacturer : Baum Tools



Add:
2079 Crankshaft Pulley Nut Wrench

Removes and installs crankshaft pulley nut on all 5 cylinder engines while in car. Use with #2084, #3197 or #3256. Fits: VW - Fox, Quantum, AUDI - ... more info

Tool : 2079
Manufacturer : Baum Tools



Add:
20A Dial Indicator

'Midget' dial indicator with revolution counter, flat backing, knurled bezel,8mm shank for European stands and40mm diameter face. Ideal for tight ... more info

Tool : 20A
Manufacturer : Baum Tools



Add:
20AB Dial Indicator

5mm RANGE/.01mm ACCURACY 'Midget' dial indicator with revolution counter, flat backing, knurled bezel, 8mm shank for European stands and 40mm ... more info

Tool : 20AB
Manufacturer : Baum Tools

244B Drift Sleeve

Installs seals, bearings and spacers. Fits: VW, AUDI - All

Tool : 244B
Manufacturer : Baum Tools



Add:
244B Drift Sleeve

Installs seals, bearings and spacers. Fits: VW, AUDI - All

Tool : 244B
Manufacturer : Baum Tools



Add:
3049A Exhaust Clip Spreader

Remove and install exhaust manifold spring clips. Fits: Golf, Jetta, GTI, Rabbit, Scirocco, Passat (Diesel 1981 and earlier, Gas 1985 and earlier)

Tool : 3049A
Manufacturer : Baum Tools



Add:
3090 Connecting Rod Support

Holds up connecting rod to facilitate installation of piston pins. Use with #3091, #3159 and #3092. Fits: Vanagon Waterbox

Tool : 3090
Manufacturer : Baum Tools



Add:
3092 Cylinder Sleeve Puller

Removes cylinder sleeve on Wasserboxer engine. Fits: Vanagon Waterbox

Tool : 3092
Manufacturer : Baum Tools



Add:
3151 Clutch Cable Fixture

Positions self adjusting clutch cable at transmission. Fits: Golf, Jetta, Scirocco 1985 and newer, AUDI - A2, A4, A6 Front and 4 wheel drive.

Tool : 3151
Manufacturer : Baum Tools



Add:
3176 Centering Mandrel

Centers drive plate and installs pilot needle bearing. Fits: AUDI - 80, 90

Tool : 3176
Manufacturer : Baum Tools



Add:
3178 Clutch Alignment Disk

Centers clutch for easy installation when assembling the clutch on the 16 valve engine. See #547 for earlier models. Fits: VW - All 16 Valve Engines ... more info

Tool : 3178
Manufacturer : Baum Tools



Add:
3183A Castellated Nut Socket Wrench

Use to remove retaining nut on bearing ring. Fits: 01M

Tool : 3183A
Manufacturer : Baum Tools



Add:
3190A Centering Mandrel

Centers drive plate when assembling clutch.02Z, 02T, 02R, 02B, 02G, 02D. Fits: Golf, Jetta, Passat, Corrado, T4 Eurovan 1991 and newer

Tool : 3190A
Manufacturer : Baum Tools



Add:
3199 Camshaft Locating Fixtures

Use to position camshaft during reassembly to insure correct timing position. Fits: AUDI - V8 2/89-4/96 ABH, PT

Tool : 3199
Manufacturer : Baum Tools



Add:
3242 CRANKSHAFT LOCKING PIN

Holds crankshaft at TDC (top dead center) when removing and installing toothed timing belt and flywheel/drive plate. Use with #T10060A, #3243 and/or ... more info

Tool : 3242
Manufacturer : Baum Tools



Add:
3242 CRANKSHAFT LOCKING PIN

Holds crankshaft at TDC (top dead center) when removing and installing toothed timing belt and flywheel/drive plate. Use with #T10060A, #3243 and/or ... more info

Tool : 3242
Manufacturer : Baum Tools



Add:
3268 Camshaft alignment Plate

Use to locate the camshaft for proper timing position when assembling the VR6 engine. Fits: VW - Passat, Engines: AAA, AES & AFP

Tool : 3268
Manufacturer : Baum Tools



Add:
3270 Camber Adjuster

Adjusts front wheel camber. VW Corrado, Passat Golf, Jetta III with VR6 engine. Fits: VW - VR6 engine

Tool : 3270
Manufacturer : Baum Tools



Add:
3289 Brake Pedal Release Tool

Disconnects the brake pedal from the brake booster. Fits: VW - Jetta (VR6)

Tool : 3289
Manufacturer : Baum Tools



Add:
3309 Clutch Release Tool

Use to release clutch when removing clutch master cylinder Fits: VW - New Beetle from 1999, Golf, Jetta (VR6) 1992 and newer

Tool : 3309
Manufacturer : Baum Tools



Add:
3318 Clutch Release Tool

Allows easy release of the connection between the clutch master cylinder and the clutch pedal. Transmissions 02A, 02K, 02C, 020, 02J Fits: VW - ... more info

Tool : 3318
Manufacturer : Baum Tools



Add: